Donate SIGN UP

gasman

21 to 40 of 719

First Previous 1 2 3 4 5 Next Last

Avatar Image
corylus
help please gasmen, how do I get the pressure back up in my condensing boiler after bleeding 2 radiators. Have tried inserting the screw tap under the boiler but can't get the pressure up.
Avatar Image
HAWKE
I have a power shower , will this work off a combi boiler also someone recomends a german model but can't remember the name, are there some makes better than others.
Avatar Image
shhiffty
just bought a new house and my combi boiler drips contantly from the ouside overflow. I drain it two or three times daily to reduce the pressure but it climbs again steadily. I have disconected the...
Avatar Image
Spreeny
I've recently moved into a house with gas central heating ( always had electric before ) someone suggested I put rust inhibitor into the system, I've bought some but with no instructions - please can...
Avatar Image
marlonski
I am about to lay some T & G flooring on new build 1st floor joists.Do I need to glue the T & G or just screw it?
Avatar Image
puddicat
My radiators are just heating a wee bit from the bottom, the water is red hot, but not the radiators, we had probs before with the heating, and had to wait for a new part,so no heating or hot water...
Avatar Image
mj2000uk
Hi Help please!!! We switched our heating on today (anyone else notice the cold?) and most of our house radiators work fine except one!!! This is our lounge radiator, its downstairs and all other...
Avatar Image
jigman1
Hi. I want to fully tile a bathroom wall that is currently half tiled with very thin ceramic tiles. they are solid so I want to tile over them . Does anyone know a diy filler/plaster product that I...
Avatar Image
kelfoan
Just moved house and found a strange little cartridge attached to the water pipe under the sink. It is a 'combi care compact 'and recommends replacement every 12 months.Any one know what it is for,...
Avatar Image
ruthann58
has the pipe which carries the oil from the tank to the boiler got to be underground or can it run on the outside of the wall
Avatar Image
Scarlett
I have a big old immersion heater that heats the hot water for the kitchen and bathroom taps. This morning I noticed that the water was only lukewarm and never got hot, despite running the tap for a...
Avatar Image
earthakitten
I have a slight water leak when DHW is used. The leak is coming from the push rod of the Pressure Differential Valve of Potterton Performa 24. Is it likely to be a damaged diaphragm causing the...
Avatar Image
mumandmore
i am getting some building work done and no one seems able to tell me what the minimum distance a velux window can be from a chimney. i want the window to be an opening one so it needs to fulfill that...
Avatar Image
oscark9
If I have the following pavers how many would be in each square metre please: 600 x 600 600 x 450 450 x 450 450 x 300 300 x 300
Avatar Image
J.JJ
Has anybody dealt with dry rot, can you give me details of chemicals required and companies that will supply me with them.Many thanks. John
Avatar Image
NavMan
What does the fault code "d3" mean on a Worcester 30 CDi?
Avatar Image
gucciman
i guys just been watching 60 minute makeover, i noticed that the house they were working on had a warm air unit in the bedroom, i thought open flued gas appliances couldn't be installed in a bedroom?
Avatar Image
oggy777
If i raise the cold water tank that feeds the hot water cylinder or increase the size of the tank or indeed both will the hot water presure and flow rate increase noticably at the tap?
Avatar Image
2gbmum
Is it worth putting new doors etc. onto old carcasses? It sounds like a clever, cost-saving thing to do but does it end up being odd looking and not so cheap? What happens about all the end panels and...
Avatar Image
marlonski
Can I vent my combi boiler directly up through the roof space (with a flue obviously) and out through a tile vent etc. The outlet is on the top of the unit.It is currently situated on the outermost...

21 to 40 of 719

First Previous 1 2 3 4 5 Next Last