Donate SIGN UP

Dishwasher

Avatar Image
petesgrayz | 21:52 Tue 21st Dec 2010 | How it Works
3 Answers
Hi. when the dishwasher is on it lets out a quick burst of steam through the door, and I put it on at 10 o'clock the other night and it was still warm the next morning.
Any ideas what the problem is.
TAI
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by petesgrayz. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Is there water in it? Not being funny but now and again mine will start without the water drawing into it, the element then gets fearsomely hot and steam comes out (from the residual water in the bottom). I always make sure the water's going in now, before leaving it to do its stuff.
Question Author
Thanx boxtops i'll check it out, but it seems to be working fine.
Ours does the same but is otherwise working fine. It seems that the door seal is not complete. Since the seal itself is OK I am assuming that the door has warped slightly and therefore doesn't close properly. Difficult to tell visually, but steam is certainly escaping.

1 to 3 of 3rss feed

Do you know the answer?

Dishwasher

Answer Question >>