Donate SIGN UP

ABS Warning Light

Avatar Image
36TEAK36 | 17:51 Wed 09th Jun 2010 | Motoring
5 Answers
The dashboard ABS Warning Light has just come on, and I was wondering if it was dangerous to drive if there may be a problem with my ABS. My car (Rover 75) still seems to brake ok, and the only difference I can tell is that when i first applied the brakes there was a slight grinding feel to the brake pedal. Could I just need new brake pads, as they are now about 2 years old?

Any advice would be most appreciated.
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by 36TEAK36. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
The ABS is not functioning, that is not related to the pads which if you are feeling grinding do need changing. It is safe to drive but be aware that you will have no ABS so if you brake hard you can lock the wheels.
On my Rover 200 this occurred occasionaly but was caused by dirt in the sensor. My garage sorted it (without charging me!).
Car will be fine to drive,sounds like ABS is activating when pushing the brake pedal,the grinding sound is the ABS pump activating.Probably means broken ABS ring one of the driveshafts or hubs of the car.But whould get it checked out sooner than later.
Check the pads and sensor rings all round.
ABS will have limited effect.
Light on does not mean it is not working at all.
Question Author
Thank you all for your help, I will book my car in at my local garage to get it looked at.

1 to 5 of 5rss feed

Do you know the answer?

ABS Warning Light

Answer Question >>