Donate SIGN UP

Firmware Update

Avatar Image
Bazile | 09:37 Tue 02nd Apr 2019 | Technology
6 Answers
''Do not unplug the USB connection until the process is complete ''

The above has appeared on mobile phone - when phone was plugged in to charge battery

What is Firmware update ?
Gravatar

Answers

1 to 6 of 6rss feed

Best Answer

No best answer has yet been selected by Bazile. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
its like software only harder....do as you are told!
And like hardware only softer.

It's your phones operating system which keeps things secure and up to date. Amongst other things.
Question Author
ok thanks
Software is programming that is stored on your hard disk and which you copy into volitile RAM memory when using.

Firmware is programming stored on integrated circuit chips, probable non-volitile memory, on your circuit board so it's always there ready to use from power up. It rarely needs upgrading, and if you do so do it with care, because an interruption could ruin whatever drives your tech, in this case a mobile phone, and probably result in you taking it to a workshop for recovery.
Question Author
now you tell me
Charger was removed before message was seen

//''Do not unplug the USB connection until the process is
complete '' //
Would that include the charger ?


If your battery was in a semi charged state it will be fine .. the reason they say "do not remove charger" is because, should your battery be discharged and you were updating over wifi, your update would fail if your battery went flat.
If the charger is connected during the update, then there is no chance of battery going flat and interupting the update.

1 to 6 of 6rss feed

Do you know the answer?

Firmware Update

Answer Question >>