Donate SIGN UP

Card readers

Avatar Image
fbg40 | 14:36 Fri 27th Jun 2008 | Computers
12 Answers
Help !! I have an internal card reader on my PC in a 3.5" bay, and recently the PC was away at the hospital. When it came back, this card reader was shown in "My Computer" as a "Device with removeable storage" as drive "H". It was working fine until now. It is not showing under My Computer and does not "activate" (?) when I insert an SD card. However, the USB port also on this reader works fine !! Can anybody throw any light on this matter ? Any help would be extremely welcome.
FBG40
Gravatar

Answers

1 to 12 of 12rss feed

Best Answer

No best answer has yet been selected by fbg40. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Have you install any new hard/software or removed any programmes?
Question Author
Hi May 57,
Answer NO, I haven't installed any hardware/software. Thanks for your reply
FBG40
Unfortunately the reader isn't connected to USB ... (as far as windows is concerned) - btw XP or vista

why in hospital ?

open the box .... it sounds to me as if they've disturbed the connector

if not that

open device manager ... and it should be under disc drives
as "generic usb flash2 - so the drivers are just there.

you could try deleting the entry and rebooting ... windows might pick it up

Question Author
Hi AC the Troll

It's been in Hosp for a new DVD Writer. XP btw. Thanks for your reply
FBG40
Question Author
It's me again for AC the Troll - just checked Device manager - the card reader is not listed.
FBG40
Have you restarted since you got it back?

If you haven't, and you've used the disconnect system from system tray in bottom-right, all the drives can be 'removed' until next restart.
Question Author
Hi fo3nix
I've had it back for over a week. On the first day it was home, I tried everything out to check they hadn't "mucked" anything up and the card reader was working fine. I used it last week as well, fine again. It was only when I tried to use it yesterday that it has "disappeared" again, although the USB port on the same reader is working OK.
Many thanks
FBG40
if it's not in device manager ... it's not there

given what you said ... it's probably just disconnected
if you don't feel confident take it back .... if you do ... check both ends of the cable(S)
Question Author
Hi AC the Troll
Many thanks for your troubles. Checked all the connections, all seem to be OK. By process of elimination, I think the card reader has probably got an intermittent fault - any opinions ?
Thanks again
FBG40
Question Author
For AC the Troll (again)
Just for info,
when I checked I disconnected at the M/Board then re-connected - it's now working !!
FBG40
Question Author
For all those kind enough to respond to my "trouble" - many thanks. All seems to be OK now, hope it lasts. Thanks again
FBG40
hi

away a few days ...

well done - sounds like a "mucky" connection
too much of a co-inky-dinky for it not to be

1 to 12 of 12rss feed

Do you know the answer?

Card readers

Answer Question >>