Donate SIGN UP
Home > How it Works > Mincing Machine

Mincing Machine

Avatar Image
Poppetchops | 14:52 Wed 25th Mar 2009 | How it Works
3 Answers
I have just acquired an old-fashioned manual mincing machine and am not sure how to assemble it. Do I have to attach more than one of the round slotted discs to it and do I need washers ?
prev Do you know the code for car radio in Renault Scenic?
  
next Fashion help! Jane Torville Dress
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by Poppetchops. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image McMouse
Only use one disc at a time. Each disc will have different size holes and the holes determine the size of the mince i.e. smaller the hole = finer the mince.
Assemble as follows: Fit the four prong blade to the spirally bit, then the disc. My one doesn't need washers........good luck.
15:10 Wed 25th Mar 2009
Avatar Image Lord Unstone
don't you need two discs? One is held in place by a tag, the other rotates with the handle.
20:36 Wed 25th Mar 2009
-- answer removed --

1 to 3 of 3rss feed

Do you know the answer?

Mincing Machine

Answer Question >>