Donate SIGN UP
Home > Home & Garden > DIY > Washer/Dryer Leaking

Washer/Dryer Leaking

Avatar Image
Graham-W | 19:23 Wed 30th Mar 2011 | DIY
2 Answers
We have just inherited a Hotpoint WD52 washer drier and there is a slight leak from between the drum outlet and the sump drain connector. I have replaced the O-ring but there is still a slight leak. There doesn't seem to be anything for the O-ring to seat onto at the top of the drum outlet. Is there something missing or any suggestions welcome.
prev Laying new patio over existing slabs
  
next Hanging large heavy mirror to Edwardian wall?
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by Graham-W. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image AlBags
I would say distortion of (plastic?) due to water and heat.
Refit again with silicone sealant and leave 24hrs to cure.
19:26 Wed 30th Mar 2011
Avatar Image Graham-W
Question Author
Thanks AlBags. I was going to use the silicone as a last resort. It may be time for the last resort.
19:30 Wed 30th Mar 2011

1 to 2 of 2rss feed

Do you know the answer?

Washer/Dryer Leaking

Answer Question >>