Removing kitemark emblem from toughend glass panels

[Robbiesos]

I have recently had some interior doors fitted that each have 15 glass panels. Unfortunately the glass panels have all got the kitemark on them to verify that toughend glass has been used. Is there any way of removing these kitemarks as I feel that they are a little unsightly.

[woodchopper]

They are most likely etched into the glass with acid - so it is unlikely to be able to remove them.
On second thoughts - It may be able to get the marks polished off - no idea if it is possible though - ask a friendly glazier.

[buildersmate]

They are supposed to be there to show that toughened glass was fitted. I don't believe they can be polished out - the glass is tough - remember?

[tufty7]

You can have these de etched but you may end up with a slight distortion due to the fact that a skim of glass including the etch will be removed,
If the etch mark "dissapears" with a wet finger , you can get some clear nail varnish and make them less obvious to the eye.