Donate SIGN UP

concrete

Avatar Image
J.JJ | 14:50 Tue 29th May 2007 | Home & Garden
4 Answers

what is the right mix for fence posts

i.e.:- cement, sand and gravel please ?
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by J.JJ. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
1 cement 2 sand 4 gravel
It's a jolly sight easier to use bags of Post Mix from any of the Builders Merchants. Does away with mixing up yourself and as there is a dab of rapid hardener in it you can leave the post to stand up on it's own after about 30 seconds.
i sell a post mix in my shop that goes off within 6 mins and thats without adding hardeners? alternativly, when we do a fencing job i do a 5 ballast to 1 cement mix.
All proprietory Post Mix in bags have rapid hardening cement - its Ordinary Portland + aluminium. A mix of 1 of Ordinary Portland to 6 of ballast is quite sufficient - 1:2:4 is far to strong and unnecessary. However, with Post Mix all you have to do is drag the bag to the hole, half fill the hole with water, tip sufficient of the bag in until you have a paste, stand there for 30 seconds, then move on to the next one. Much easier than knocking up concrete, whether by hand or mixer.

1 to 4 of 4rss feed

Do you know the answer?

concrete

Answer Question >>