Donate SIGN UP

Thermostatic radiator valves.

Avatar Image
Aquagility | 12:34 Tue 06th Feb 2007 | DIY
4 Answers
My seven year old house has a thermostatic valve on each radiator, but they don't operate effectively. If a rad. stays cold in a cold room it is necessary to turn it down to low and up again to hot - then the rad. heats up.
Do I need new valves, or what can I do to breath life into the old ones?
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by Aquagility. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
I've had this happen. If you remove the adjustment bit of the valve (either unclip or unscrew by hand dependent on make) you will see a small brass pin sticking out of the valve body. This is what sticks down. I just pushed it down and pulled it up with pliers a few times, but with hindsight, probably a drop of WD40 would have helped.
Question Author
Thanks, tony, I'll try that.
Were you born in 1941?
Yes. It was ages ago! (in Liverpool)
Question Author
Very good. I sailed out of Liverpool on the Yeoward Line 'Alca' in 1936!

1 to 4 of 4rss feed

Do you know the answer?

Thermostatic radiator valves.

Answer Question >>