Donate SIGN UP

Aerial Connection

Avatar Image
drillhammer | 02:52 Fri 09th May 2003 | Technology
6 Answers
I've just installed a simple aerial in the loft and to connect it to my hi-fi should I use coaxial cable or, if the intention is to receive as much signal as I can, should I use simple 5 amp lead/loudspeaker wire?
Gravatar

Answers

1 to 6 of 6rss feed

Best Answer

No best answer has yet been selected by drillhammer. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Use the co-ax! If it's a very bad reception area, I have heard it suggested that satellite co-ax is the best (if more expensive) solution.
You can get audio coax from good hifi shops. it has a different ohmage tv coax not really suitable.
Now I'd have used simple twin-flex electrical, as drillhammer said, to get as much signal as possible. When then is it advisable to use coax?
Question Author
Thanks fellas
the reason for coax; worker; the aerial is an exact wavelength or halfwave etc and if the wire from it is not coaxially shielded, it becomes part of the aerial, causing an incorrect wavelength and therefore poor signal.
Bang goes my 'bent six-inch nail theory'. Thanks for that xyzzy@bok.

1 to 6 of 6rss feed

Do you know the answer?

Aerial Connection

Answer Question >>