Donate SIGN UP

Epsom

Avatar Image
stojkiw63 | 20:20 Sun 08th Apr 2012 | Computers
5 Answers
MY EpsomD68 says service is required. Can I do anything myself.
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by stojkiw63. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
I think you mean Epson
Question Author
OK so I put m not N but I need an answer.
Probably not. Believe it or not, inkjet printers have a giant sanitary towel in the bottom which soaks up all the spilled ink (from alignment checks, head cleaning and printing). The most common cause of the "Service required" message is that the printer has decided that the absorbent is full. It may be possible to cancel the message and continue to use the printer. But then you risk flooding your desk with ink.
I asked a similar question a few weeks ago. See here:

http://www.theanswerb.../Question1116129.html

I've done nothing about it yet, but it looks like it is repairable. It's resetting the counter that's the problem.

Here's the link to the people who can supply the replacement for the pads:


http://www.octoink.co.uk/
Many of the Epson printers ink cartridges have a sensor that allow the printer and the associated software know when to replace the printer ink cartridges (even when the cartridges have ink within them) and when the printer needs to be cleaned. In some cases you can bypass this message by following either of the below steps.

Use printer buttons to reset

Use the printer buttons to reset the printer by pressing and holding the "Stop", "Maintenance", and "Power" buttons all at the same time.

Other Epson models such as the RX620 require you press and hold the "Stop", "B&W", and "Power" buttons all at the same time.

Use third-party SSC service utility

In addition to the above recommendation users can install SSC Service Utility, a third-party utility that allows you to adjust and customize many of the settings including the sensor that generates this message.

C47, C48, C67, C68, C87, C88, CX3700, CX3800, CX3810, CX4100, CX4200, CX4500, CX4600, CX4700, CX4800, CX3650, CX6300, CX6400, CX6500, CX6600, CX3650, CX3700, CX5100, CX5300, CX7800, D68, D88, DX3800, DX3850, PictureMate, PM-970C, PM-A700, PM-G720, R220, R230, R320, R1800, R2400, RX420, RX425, RX620, RX430, RX500, RX510, RX520, RX600, RX610, RX700

Hope this helps.

1 to 5 of 5rss feed

Do you know the answer?

Epsom

Answer Question >>