Donate SIGN UP

peugeot 206 tapping

Avatar Image
hannar | 19:49 Thu 06th Nov 2008 | Motoring
4 Answers
Hi I have owned a 1999 1.1 206 for almost two months and have had to have the clutch changed because of a loose b earing but still sometimes te clutch pedal when pressed down to change gears doesnt want to come back up. And also theres a tapping noise coming from i think the auxiliary belt and when i pour water on it it stops? Any help on these two? Many thanks my boyfriend thinks i imagine the clutch clipping becuase it only happens a few times. Than ks
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by hannar. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Question Author
Sorry i meant in the last bit the clutch sticking.
if it is a hydraulic clutch then it may need to be bled again, otherside it could be the release/thrust bearing not sliding back and forth freely
Sounds to me as though the clutch inner cable is frayed and the strands are snagging on the outer sheath, it shouldn't be that expensive to replace. I'd be interested to know which bearing was loose that necessitated a clutch change.(?)
As for the belt ticking, mine makes a ticking sound when the engine is idling, in my case I think it is caused by the alternator after a cold start and it goes away once the battery has recovered its charge. You could get the belt changed and correctly tensioned and see if that cures it. They don't last forever.
Question Author
Thanks sorted out the tapping and i changed the fan belt (auxiliary) and its sorted now the stupid man who changed my cambelt had tightened it too tight so it was knackered

1 to 4 of 4rss feed

Do you know the answer?

peugeot 206 tapping

Answer Question >>