Donate SIGN UP

head gasket repair !

Avatar Image
jmck66 | 19:11 Wed 21st Mar 2007 | Motoring
6 Answers
I got my head gasket replaced on my rover 45 (almost �700),when it was being repaired i received a call from the garage informing me that i needed a new rad because of bad gunge on the existing.When i picked the car up he told me to return after 200 miles to tighten bolts and flush out the water system.I did this today and when i picked the car up the water expansion tank was still full of the water /oil mix ,and the young mechanic said he wasnt told to flush the system but with no manager there i couldnt really argue ,My point is surely i should have got the car back without all this gunge in my expansion tank,and do i have a right to complain and have it cleaned out properly? THANKS
Gravatar

Answers

1 to 6 of 6rss feed

Best Answer

No best answer has yet been selected by jmck66. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
I would have expected it to come back 'gunge free'. Just ask them to do it for you.
-- answer removed --
Question Author
Thanks for the advice doctor spock. I will go into the garage tomorrow. I'm a bit concerned about even letting them near my car now in case they might sabotage it in any way. Paranoia is obviously setting in now !!
-- answer removed --
Question Author
Took it back today doc spock said he cleaned it out but the oil/water mix is still inside the expansion tank albeit stuck on the top with a little gunge in the water itself .Maybe its me but i thought the expansion tank could have been removed and cleaned out proper or else the mayo is always gonna be stuck insideand visible.He also said to bring it back in a week or so and he will flush it out again.should i just tell him i want it cleaned properly?
-- answer removed --

1 to 6 of 6rss feed

Do you know the answer?

head gasket repair !

Answer Question >>