ChatterBank0 min ago
cam belt change
1 Answers
i need to change a cam belt on a 1.4 astra merit on an n-plate is this an easy job and what sort of time am i looking at? is a locking tool needed?
Answers
Only 1 answer
Best Answer
No best answer has yet been selected by shaunn8550. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
If it's the C14SE or C14NZ engine, both 8 valve ones, the book time is 1.1hours (1 hour 6 minutes), and you don't need any locking tools, but you might need a special spanner to adjust the water pump (if you do it by the book).
If it's the late model 16 valve X14XE engine the book time is the same as above, but there are two cam sprockets which have to be kept lined up spot on. I've done them without a locking tool between the sprockets, but it's way easier with one as they tend to move when you're fitting the new belt.
If you're in any doubt, get a garage to do it for you, we always change the tensioner too, guide pulleys as well on the 16V engine.
If it's the late model 16 valve X14XE engine the book time is the same as above, but there are two cam sprockets which have to be kept lined up spot on. I've done them without a locking tool between the sprockets, but it's way easier with one as they tend to move when you're fitting the new belt.
If you're in any doubt, get a garage to do it for you, we always change the tensioner too, guide pulleys as well on the 16V engine.
Only 1 answer
