Donate SIGN UP

London bus stops

Avatar Image
David H | 02:39 Wed 31st Dec 2003 | Travel
3 Answers
There are normal LT bus stops with 'head stop' and 'tail stop' on, and some even have the cheek to add 'driver information only'. What do these mysterious instructions tell the drivers?

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by David H. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Just a guess but head stop would mean the driver should stop the bus with the front next to the stop and tail stop the back of the buss level with the stop. This could be the case in london where some stops are capable of holding 2-3 busses at a time so they could both stop at the same time.
Its over 20 years since I lived in London, so I might be wrong about this, but I seem to remember that a head stop was where a route partially ended. For instance, I used to live in SE London and the 161 went from Woolwich to Chislehurst or Petts Wood. I think one of the stops in Chislehurst was marked as a head stop to remind the driver that this was where his route terminated (and he had to turn round) if he was not timetabled to go as far as Petts Wood. Its something like that.
Sounds good sddsddean, I used to get the 161 from Eltham (where I used to live) to woolwhich every now and again.

1 to 3 of 3rss feed