Donate SIGN UP

limp mode

Avatar Image
uncleisiah | 00:24 Sun 04th Jan 2009 | Motoring
2 Answers
i have a 2005 150sri vectra spanner coming on at 3800 rpm (happened after refuelling from zero with the engine running) seems to be when im going uphill. no problem when im going downhill.(it resets itself when engine is turned off and on again) any ideas???
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by uncleisiah. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
could be you've created a partial air lock. With the engine idling gently undo the fuel connection to each injector in turn ( just a quater turn will do , do not unscrew it all the way. If any air is present you will see air bubbles. Close the nut and test drive.
possible fuel pump problem or the fuel you filled it with had sediment in it from the tanks not being cleared properly at the petrol station.

take it to a garage and get them to use the diagnostic computer on it

1 to 2 of 2rss feed

Do you know the answer?

limp mode

Answer Question >>