Donate SIGN UP

Renault Master, cutting out

Avatar Image
callum0666 | 19:43 Sun 05th Apr 2009 | Motoring
3 Answers
The company i work for have a 03 reg renault master van, it has a re-occuring problem that no mecanic can figure out. it keeps cutting out, it seems especially prone to this going up hill. the injectors, fuel pump, have been checked but no change. can anybody help?
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by callum0666. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Has the fuel tank been replaced on this van of late?
Question Author
not that i know of why?
Just had the same issue with a 2006 dci120 changed fuel pump, solenoid, injectors, fuel tank off and cleaned etc... No diagnostic including main dealer Renault found a fault so according to them nothing was wrong. The problem showed up as a complete cut out of the engine when the engine was pulling hard between 1500 and 2000 rpm and at high speed pulling hard, the thing just cut out but if you turned the key back one turn then back to run it would burst back into life.
Our mechanic decided to change the brain over from our other older van which provided a fault code for low pressure in the common rail. Chaged the rail Job done, runs very well now. Renault waste of space, buy a Mercedes would be my advice.

1 to 3 of 3rss feed

Do you know the answer?

Renault Master, cutting out

Answer Question >>

Related Questions

Avatar Image
callum0666