Donate SIGN UP
Home > Home & Garden > Hot water tank

Hot water tank

Avatar Image
mclauchlan | 02:07 Thu 12th May 2005 | Home & Garden
2 Answers
My hot water tank has 3 x22mmm holes: bottom is cold in I understand and the very top hot out ,but the 3/4 of way up 22mm has me confused as there is no coils or anything in the tank.
think it will be ok to blank off?
prev Anyone use Brighthouse?
  
next Sunflower Seeds
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by mclauchlan. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image Galena1

It is just a spare connection. You can just blank it off.

If you had a coil in the cylinder you would have 2x 1" Male Iron threads about 1" long sticking out from the side of the cylinder, one above the other (usually) and about 15" apart.

19:05 Thu 12th May 2005
Avatar Image secretspirit
Are you sure the top hole isn't for an overflow pipe? Some cylinders do have them just in case they over-fill.
20:29 Wed 18th May 2005

1 to 2 of 2rss feed

Do you know the answer?

Hot water tank

Answer Question >>