Donate SIGN UP

blowing hot 'n' cold

Avatar Image
JohnOne111 | 22:14 Tue 30th Dec 2008 | Home & Garden
6 Answers
My hot water goes from hot to cold every few seconds? my heating is unaffected but when I use the shower I get 15 seconds of hot water followed by 15 seconds of cold- this cycle goes on until I switch the hot tap off? Anyone have any ideas?
Gravatar

Answers

1 to 6 of 6rss feed

Best Answer

No best answer has yet been selected by JohnOne111. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
try not turning the tap on so fast i was told that boilers that heat the water instantly as its used ,you should not turn the tap on to fast as it passes through the whatever to fast to heat it
Question Author
thanks for that - the rate and speed the tap is turned on makes no difference?
-- answer removed --
If its a combi, sounds like it needs a new hot water thermister, also known as an NTC sensor.
you need to call out a heating engineer who will then very kindly fit a new hot water thermister for you.
Question Author
Sounds like the 'hot water thermister' is the way forward...many thanks guys and happy new year :)

1 to 6 of 6rss feed

Do you know the answer?

blowing hot 'n' cold

Answer Question >>