Donate SIGN UP
Home > Home & Garden > optima plus 2 household alarm

optima plus 2 household alarm

Avatar Image
bartyarmy | 17:27 Sun 12th Oct 2008 | Home & Garden
3 Answers
hi sorry about this, but last week i set a question about my household alarm I managed to reset it but then the other night it went to "tamper " flashing and a "6" flashing . I have powered down a couple of times still the same when powered up with the inside cover off it says "c" "u" then cover on and "tamper" "6 " flashing..I have checked the outside box cleaned it out ,and checked the connections in the inside box .can any one help please thank you inadvance cheers
prev Garden Furniture
  
next washing mashine
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by bartyarmy. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image Disco Fever
Find out which PIR or door contact is zone 6 and you'll find that the tamper is open circuit which is why your getting the tamper light and the no. 6 flashing, I bet you'll find that the cover off of one of the sensors is not fitted properly....
08:21 Mon 13th Oct 2008
Avatar Image Disco Fever
The C means that you are in customer program mode, the U means the panel main cover is off....
08:22 Mon 13th Oct 2008
Avatar Image bartyarmy
Question Author
thank you but I have only 4 zones in the alarm circuit I don't know what zone 6 is do you have any Ideas please
19:16 Mon 13th Oct 2008

1 to 3 of 3rss feed

Do you know the answer?

optima plus 2 household alarm

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.