Donate SIGN UP

peugeot 806 1989 brake problem

Avatar Image
glenn-3 | 22:25 Sat 21st Jun 2008 | Motoring
4 Answers
why do my brakes bind on after 3 miles and only clear when i leave it to cool down and then the same after 3 miles again
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by glenn-3. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Time to put your hand in your pocket and spend some dosh mate.

When was the last time the brakes were overhalled ?.

Could be brake calipers seized, or rear brake calipers seized, brake shoes heating and expanding, old brake master cylinder oil expansion, the list goes on....

For safety reasons, get a good fitter to look at the brakes and if need be start changing a few parts.

Don't take it to Kwik Fit as they will rip you off !


have you or somebody adjusted anything lately
like handbrake cable,
otherwise go with what bravo1 says, unless you are competent enough to sort it yourself,
otherwise leave to the experts- but don't get ripped off

it may be worth getting rid of it, if it is gonna cost too much to fix. nearly 20 years old- something else is gonna fail soon. possibly
sounds a sthough you maybe have a seized piston in one of your calipers, the binding is probably happening because as the brake disc heats up it expands therefore causing the bind, and also as it cools it contracts so therefore the bind goes away, maybe worth having them looked at as bravo says
Question Author
hi there just to say that i have sorted the problem it was a collapsed flexy pipe common on peugeots thanks

1 to 4 of 4rss feed

Do you know the answer?

peugeot 806 1989 brake problem

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.