Crosswords1 min ago
Beunchico & Webdude
1 Answers
Hiya , left a message for u guys on my last post. Did the jumper and battery thing, but still wont go past the fujitsu siemens page. gives me the F2and F12 options, and i can get into BIOS setup, but then what ?? Is it totally knackered ?
Answers
Only 1 answer
Best Answer
No best answer has yet been selected by LittleMissxx. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Resetting the BIOS might have changed an important setting. The most obvious one is the CPU frequency. (Some PCs wont boot up properly if the wrong frequency is set).
If you know what speed processor the PC has (e.g. 2.8GHz), try to see if there's any information on the screen, when the PC starts, to indicate the reported speed. For example, if you've got a 2.8GHz processor, which is meant to run at 133MHz, you might find that it's reported speed is only 2.1GHz because the BIOS has defaulted to 100MHz. Resetting the CPU frequency, to what it should be, will correct the problem; the PC might then boot up properly.
Chris
If you know what speed processor the PC has (e.g. 2.8GHz), try to see if there's any information on the screen, when the PC starts, to indicate the reported speed. For example, if you've got a 2.8GHz processor, which is meant to run at 133MHz, you might find that it's reported speed is only 2.1GHz because the BIOS has defaulted to 100MHz. Resetting the CPU frequency, to what it should be, will correct the problem; the PC might then boot up properly.
Chris
Only 1 answer
Latest Posts
News2 mins ago
ChatterBank3 mins ago
Crosswords14 mins ago
News26 mins ago
News35 mins ago
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.