ford sierra wing replacment

ern8888 | 19:26 Sun 28th Jan 2007 | Cars

2 Answers

does anybody know how to change a offside front wing
on 1991 ford seirra as i was hoping it was bolt on but it is spot welded. any help greatfully recived......

Cigarette Lighter

Oil Leak

Answers

1 to 2 of 2

Best Answer

No best answer has yet been selected by ern8888. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

gsr600

Hi
You can buy a specifically shaped drill to allow you to drill into the spotwelds (half way through only) this is easy on the top of the wing, but all other areas unless bolted are difficult to reach ie remove door,otherwise remove the bulk of the wing with a chisel leaving the welded parts then grind or drill the remaining spotwelds off, so you can offer up the new panel,
you may be able to drill & bolt on the new wing,or get somebody to weld it for you,
painting is another problem.
have fun;
i hope this is of help!

ern8888

Question Author

ok thanks mate that is a lot of help and i think im going to need all the help i can get..

1 to 2 of 2

Do you know the answer?