Donate SIGN UP

Wall Tiles

Avatar Image
gertieg123 | 09:52 Thu 12th Oct 2006 | Home & Garden
4 Answers
Is there a way to remove wall tiles and keep them whole to use again?
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by gertieg123. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
I't very unlikely that you'd be able to remove & reuse wall tiles ...

the only situation I could think of is if the tiles are very, very thick and were stuck on by tiny, tiny blobs of adhesive.

I can gaurantee that you won't be able to use all of them again. You might be able to get a few off whole, but not all.
We faced this problem when a neighbour with identical bathroom tiles decided to renovate their bathroom and remove them. We wanted some spares as we're thinking of converting our en suite with bath to a shower room, and it's fully tiled so would need extra matching tiles. They were carefully removed with a chisel & hammer but every single tile has so much solid tile cement on it that it's proved impossible to clean most of them. I've soaked them in hot soapy water overnight to try and soften the tile cement so it can be easily scraped off but at least 70% of the tiles have not responded. I've also tried soaking them in water with some Limelight added in the hope that this would dissolve the cement, to no avail. Am afraid it's been a time-consuming and largely futile exercise.
I've had the same problem and ground enough adhesive off the back using an anglegrinder, to recover enough secondhand tiles for what I wanted to replace, when new tiles cannot be bought. Its a messy process and only recommended if you must.

1 to 4 of 4rss feed

Do you know the answer?

Wall Tiles

Answer Question >>