Donate SIGN UP
Home > How it Works > Ripping Up A Wood Laminate Floor

Ripping Up A Wood Laminate Floor

Avatar Image
chrissa1 | 14:21 Mon 29th Nov 2010 | How it Works
29 Answers
I just took delivery of my new washing machine to find that they couldn't/wouldn't get it out from under the newER laminate flooring. I've never liked it and the delivery men have departed. How do my daughter and I rip out the bit of flooring to free the old washing machine? Thanks.
prev Snowflake symbol
  
next Sky Plus Help
Gravatar

Answers

1 to 20 of 29rss feed

1 2 Next Last

Best Answer

No best answer has yet been selected by chrissa1. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image bednobs
do you have a crowbar?
14:22 Mon 29th Nov 2010
Avatar Image chrissa1
Question Author
No, do I need one? I was thinking a chisel and a hammer.
14:38 Mon 29th Nov 2010
Avatar Image AlBags
Well .. I would surface cut a section in front to allow it to roll out first. Then fit new machine and rebond section back in.
I take it the surface above cannot be lifted because of wall tiles?
It must be pretty tight for height .. and/or the laminate thick to stop it coming out.
14:44 Mon 29th Nov 2010
Avatar Image chrissa1
Question Author
What with albags?
14:51 Mon 29th Nov 2010
Avatar Image NazNomad
I replied in your other thread ... missed this one, sorry.
14:52 Mon 29th Nov 2010
Avatar Image Dodger666
A washing M/C usually has a couple of adjustable feet at the front for levelling purposes. If they are able to be screwed up it may give you enough clearance to enable you to get it out.
17:42 Mon 29th Nov 2010
Avatar Image chrissa1
Question Author
It's such a tight fit and has been there for so long that it appears that to cut the flooring is the only answer. My daughter and I are going to attack it tomorrow, so any tips would be gratefully received.
19:41 Mon 29th Nov 2010
-- answer removed --
Avatar Image chrissa1
Question Author
Aw doc, it would be lovely to see your smiling face struggling up my drive in the snow!
19:48 Mon 29th Nov 2010
Avatar Image NazNomad
... the worktop can't be lifted then?
19:49 Mon 29th Nov 2010
Avatar Image chrissa1
Question Author
Nope naz, not a hope.
19:50 Mon 29th Nov 2010
-- answer removed --
Avatar Image NazNomad
My last resort would be cutting the floor ... I'd cut up the old machine in-situ.
19:52 Mon 29th Nov 2010
-- answer removed --
-- answer removed --
Avatar Image chrissa1
Question Author
Oh bless you doc. The gap between the top of the machine and the worktop is about 1cm. Don't fancy tackling that. The floor is stained after we had a leak from the cistern so it has to be replaced. I never wanted it in the first place. Give me good old lino anyday.
I don't know how to add a pic to this site.
19:59 Mon 29th Nov 2010
Avatar Image craft1948
When I bought my house the tenant left instructions on how to lift the laminate floor to get a washing machine in.......
19:59 Mon 29th Nov 2010
Avatar Image chrissa1
Question Author
Aaaaaaaaaaaaannnnnnnnnndddddddddddd??
20:01 Mon 29th Nov 2010
Avatar Image society
Did it come in handy, Crafty? ;-)
20:01 Mon 29th Nov 2010
-- answer removed --

1 to 20 of 29rss feed

1 2 Next Last

Do you know the answer?

Ripping Up A Wood Laminate Floor

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.