Quizzes & Puzzles4 mins ago
Does Anyone Know About Condenser Refrigerators
3 Answers
I have a Candy upright refrigerator which is serving me well (thus far).
Excess water comes out of the back via a tube, into a "removable" drip tray, where it should just evaporate as it is situated over the compressor (which gives off warmth).
The tray is now starting to overspill, as the water is not evaporating quickly enough.
Pulled the whole thing out to check the tray, and it was installed on an incline, so leveled this up a tad.
However, water is coming out quicker than it can evaporate, so still more mess on the floor to wipe up.
I know and can see exactly what is happening, but is there an underlying cause for this?
Does it need a new part somewhere along the line, or is it just saying that it is on its way out and need replacing?
Excess water comes out of the back via a tube, into a "removable" drip tray, where it should just evaporate as it is situated over the compressor (which gives off warmth).
The tray is now starting to overspill, as the water is not evaporating quickly enough.
Pulled the whole thing out to check the tray, and it was installed on an incline, so leveled this up a tad.
However, water is coming out quicker than it can evaporate, so still more mess on the floor to wipe up.
I know and can see exactly what is happening, but is there an underlying cause for this?
Does it need a new part somewhere along the line, or is it just saying that it is on its way out and need replacing?
Answers
Best Answer
No best answer has yet been selected by willyboy. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I suspect, without being familiar with your particular brand (I'm in the U.S.), that the "excess water" comes from one of two causes. One, simply having humid summer weather conditions that causes condensation on the inside of the fridge every time you open the door. Not much you can do about that.
Additionally, most drip trays as you describe are overflow from the automatic defrost portion of the freezer (if you have one). The plates that collect the ice (primarily from again, condensation)are heated intermittently to melt the ice collected, which then drips down to the tray. Usually, such moisture doesn't overflow but, if coupled with summer time condensation it could happen.
Long way of saying your probably stuck with the situation until the weather gets colder and humidity level decrease. Either that or don't open the door unnecessarily… Best of luck!
Additionally, most drip trays as you describe are overflow from the automatic defrost portion of the freezer (if you have one). The plates that collect the ice (primarily from again, condensation)are heated intermittently to melt the ice collected, which then drips down to the tray. Usually, such moisture doesn't overflow but, if coupled with summer time condensation it could happen.
Long way of saying your probably stuck with the situation until the weather gets colder and humidity level decrease. Either that or don't open the door unnecessarily… Best of luck!
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.