Donate SIGN UP

Tap pressure

Avatar Image
homerthegrea | 12:44 Mon 22nd Jan 2007 | Property
2 Answers
Can somebody please help, the hot water taps in both the bathroom and kitchen only go at a trickle, and the toilet takes about 10 minutes to fill back up after flushing, is there anything that can be done to get the flow faster.

Hope this is in the right section.

T.I.A.
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by homerthegrea. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Hi homerT Have you had a look in the loft if you have one, the large storage tank should be quite full nearly up to the overflow you may have ball valve troubles, that might cure hot water probs,if your toilet also depends on this tank as is the case sometimes,then you may need to change the toilet cistern ball valve (ventura) or flow restrictors inside, from mains to tank stored low pressure type,HTH Tez
Please also check the stop valve!

Probably sited under the kitchen sink, but i've found them in stranger places.

Run a tap, turn it and see what happens, one way the tap may go off, then turn it the other and the pressure (If the valve has been partially closed) will come back up.

Worth a try

1 to 2 of 2rss feed

Do you know the answer?

Tap pressure

Answer Question >>