Citroen zx locking pin for timing belt

benny3008 | 16:11 Fri 01st Jan 2010 | Motoring

3 Answers

Hi, To insert the locking pin into the flywheel through the cylinder head flange, the crank needs to be turned but no matter how much i turn it i cannot find the hole for the locking pin in the flywheel, you can only her a clicking sound from the pin hitting the teeth. Is there an easier way of finding the hole in the flywheel?

Ford fusion washer fault

Petrol or diesel?

Answers

1 to 3 of 3

Best Answer

No best answer has yet been selected by benny3008. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

Nkakamasembe

Turn the crankshaft only clockwise.1st locate the camshaft sprocket pin and then pump. If the crankshaft pin can not locate ,turn the crankshaft again 360 degrees to locate once more the camshft sprocket and pump. Try the flywheel pin by giving a gentle rocking to and fro

Nkakamasembe

Sorry the second line should have read... turn camshaft sprocet 360 deg. in which case the crank will turn 180 deg.could the size ofthe pin you are using big. try one smaller for aligning the hole

benny3008

Question Author

Thanks for your help, i actually sorted the problem shortly after i posted qu. Thanx anyway

1 to 3 of 3

Do you know the answer?