Donate SIGN UP

handbrake

Avatar Image
tom hopkins | 12:06 Thu 06th Apr 2006 | Motoring
5 Answers

please can anyone help?can the handbrake on a rover 25 (2000) be adjusted from inside the car? or is it only from underneath?


thanks


tom

Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by tom hopkins. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

For questions on specific cars you should ask on a site like this.................


http://forums.mg-rover.org/


Give it a try!

Can't remember to be precise but it's either beneath the rear ash tray (or blanking plastic if no ash tray) or lift the rubber suround to the actual physical handbrake and there's an adjuster under there.
i was going to say " pull it up, handbrake on. let it down, handbrake off " but then thought i would be deemed a prat by one and all. so i won't.
If you remove the rear ashtray you will find a nut using a 12mm spanner you can tighten the handbrake ideally the rear wheels and drums should be removed and the shoes adjusted
Question Author

Toureman, don't know if you have noticed but all questions on this site are about specific cars! there is no need to try & be sarcastic. as your comment could apply to every question.


also to anybody that replied thanks. it was under the ashtray .

1 to 5 of 5rss feed

Do you know the answer?

handbrake

Answer Question >>