Donate SIGN UP
Home > Motoring > stud diameter (and pcd)

stud diameter (and pcd)

Avatar Image
agentprawn | 17:07 Sat 04th Feb 2006 | Motoring
3 Answers
can anyone tell me the stud diameter for a honda crx (mark 1 or mark 2). am i right in thinking this measurement is know as the pcd? thanks!
prev Value ?
  
next Remote central locking
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by agentprawn. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image Skids
Yes it is the PCD (pitch circle diameter) but what that measurement is for the Mk1 -2 CRX I don't know.
19:17 Sun 05th Feb 2006
Avatar Image wallis1007

ok here we go. I'm not sure what stud pattern you have on those wheels, but this may help. Assuming that you have a wheel or the car to measure here are some formulas.For a 4 stud pattern S divided by .7071 For 5 stud S/ .5878 For 6 stud S/ .5 S being the distance between the centre point of one stud to the centre point of the next stud. Not the opposite stud. Hope this helps


22:50 Sun 05th Feb 2006
Avatar Image andrewlee
From memory it is 100mm. If you are thinking of replacing your wheels don't forget the offset! 42 in the case of the Mk 2 CRX
17:07 Mon 06th Feb 2006

1 to 3 of 3rss feed

Do you know the answer?

stud diameter (and pcd)

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.