Donate SIGN UP

boiler problems

Avatar Image
Hiss | 10:41 Fri 08th Feb 2008 | How it Works
7 Answers
would anybody have a clue why my gas combi boiler won't stay lit after igniting??? all other gas appliances are fine but the pilot light in the boiler will not continually stay on unless you have your finger on the ignition switch.
Gravatar

Answers

1 to 7 of 7rss feed

Best Answer

No best answer has yet been selected by Hiss. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
knackered thermocouple probably
The pilot light jet could be partially blocked causing the flame to be too small to register with the thermo-couple.
Get boiler engineer out. It is probably a valve. I had this problem just before christmas
The same fault on mine was caused by the bypass valve (next to the hot-water tank) being closed. I replaced it with a sprung-loaded one, but open the valve first to check if this is the fault.
Deffo sounds like a knackered Thermocouple
Question Author
thanks everybody for your input
new thermocouple needed, or pilot injector and tube needs cleaning out, or faulty gas valve.

1 to 7 of 7rss feed

Do you know the answer?

boiler problems

Answer Question >>