Donate SIGN UP

Gtech Airam Vacuun Cleaner Has Died

Avatar Image
fitdarren | 10:31 Sun 19th Feb 2023 | Home & Garden
23 Answers
Anybody got any ideas? The battery is fully charged and I've cleaned the roller which had quite a few hairs wrapped around it, but it still won't start. As far as I can remember it's about four or five years old. TIA.
Gravatar

Answers

1 to 20 of 23rss feed

1 2 Next Last

Avatar Image
Mine did this it was the on off switch. Got a new switch off eBay and a neighbour fixed it for me. Saved a fortune gtec said I needed to replace at a cost of £80 which was the complete bottom as did not fix a switch alone. They just replaced complete unit you had to keep battery and handle the rest replaced.
19:57 Sun 19th Feb 2023
Have you tried wiping the contacts on the battery?
Question Author
The contacts barry?
I had a similar problem a few years ago with a Dyson cordless and used the troubleshooting section of their website with great success.

Maybe your brand has the same sort of setup.
Contacts are the bits of metal on the battery which meet the bits of metal on the vac.
We bought a new battery for our Dyson cordless.
After you've given all the metal contacts a good wipe, plug it in to the charger. Does it light up as usual?
Question Author
Tried wiping everything, still nothing. I have looked online and couldn't find much help. I'm wondering if I need a new battery.
I think that's probably the answer, fd. It is several years old.
The battery comes with a 10 year warranty so contact GTech before doing anything 01905 345 891. Hopefully they will be able to solve your problem over the phone
I don't think a dead battery would show as fully charged - have you got a multimeter to check the battery?
Question Author
No, I haven't barry. I will try that number tomorrow. Thank you for all your help, especially you barry.
Gtech are very good, I've contacted tgem several times for various things.
My air ram has segmented green lights to show its charged , or not
OH is fond of running into the ground, so if it really flat the lights don’t appear when plugging it in . Thinking the battery was done I bought a spare. Only to discover that if you leave it on charge for a while eventually it lights up . Now have 2 batteries, so we can do “a quick change” if we are on a cleaning marathon
Question Author
I don't run mine into the ground, I only have a small house which doesn't need loads of hoovering. I'm baffled to be fair as to why it's suddenly stopped working. I'll see if I have some luck when I ring the number provided tomorrow.
barry at 10.25..re 10-year battery warranty. Not quite the correct info....only the AirRam PLATINUM has this warranty...all others are 2 years.
Mine did this it was the on off switch. Got a new switch off eBay and a neighbour fixed it for me. Saved a fortune gtec said I needed to replace at a cost of £80 which was the complete bottom as did not fix a switch alone. They just replaced complete unit you had to keep battery and handle the rest replaced.
Question Author
I think you are probably right Giggsie. The on/off switch has been a bit hit and miss for a couple of weeks now, but I always managed to get it working in the end. My brother in law is going to have a look at it for me and if it is the on/off switch, he will order me one and replace it - thanks.
It’s only tiny wire in there that’s the problem. My neighbour said easy fix £9.99 off eBay. Yes mine was the same on/off sometimes go on others not. But rip off for gtech to fix.
Gtech MK2 AR20 AR21 K9 On / Off Button Board Complete Wired £9.99
We were having problems switching ours on and off, I found this on YouTube, we didn't have the lubricant shown but we had some WD40, so gave it a go and it now works a treat.



1 to 20 of 23rss feed

1 2 Next Last

Do you know the answer?

Gtech Airam Vacuun Cleaner Has Died

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.