Donate SIGN UP

Switch With A Neon Warning Light.

Avatar Image
Bramleyboy | 14:00 Sat 02nd Dec 2017 | Home & Garden
11 Answers
We have a small dressing room with 4 lights. My wife is always leaving the light on. So I thought I would fit a switch with a light on so we could tell if the light was on. I bought one but I cannot fit it. The old switch has a Comm with two brown wires and a L1 with one brown wire. The new switch has four holes, L in, L out, N in and N out. As all the wires are Brown I don’t know what to do. I’ve tried loads of combinations. One works the light and another works the neon!! Any contribution gratefully received. Happy Christmas everyone, Bramley.
Gravatar

Answers

1 to 11 of 11rss feed

Avatar Image
Take a neutral wire from the room light down to the switch N in.... put the common brown into L in and the L1 brown into L out and it will work.
19:09 Sat 02nd Dec 2017
The switch you've bought is not designed for lighting use, it's for heavy current devices, such as washing machines powered from the ring-main. It's very difficult to do what you want to do, as neons need a neutral wire and most lighting switches don't have one at the switch end. I understand your problem as I've thought about doing the same thing with a loft light with a switch on the landing. If someone on here comes up with a solution I'll be cribbing it.
You could replace the switch with oe of these:

https://www.screwfix.com/p/elkay-outdoor-2-wire-pir-timer/57008

A bit (lot) expensive just to save electricity - it would detect someone going into the dressing-room and then keep the light on for the time you set up to 2 hours. The switch would have to be inside the dressing-room, though, so all round not a very good solution.
So, your wife doesn't notice that she's left four lamps lit....but she WILL notice a small glowing neon? Interesting.
I made this point last time you asked about this, and still don't understand...!
Perhaps, as in the case with our loft light, the switch is in one room and the light in another.
Given that this has been going on for 10 months (see 'Related Questions', below), I'm beginning to think that divorce might be simpler ;-)
....or a little notice on the wall..."Turn off the lights!"
A klaxon or tannoy announcement as she leaves the room.
Or as I had to do - call the electrician. They do know what they're doing and safely too.
Put a pressure pad switch on the floor, switches on when your wife walks in and off when she goes out.
Lateral thinking solution - replace the door with one with a glass panel in it; if the light is left on you'll see it even if the door is closed.
Take a neutral wire from the room light down to the switch N in.... put the common brown into L in and the L1 brown into L out and it will work.

1 to 11 of 11rss feed

Do you know the answer?

Switch With A Neon Warning Light.

Answer Question >>