Donate SIGN UP

floor tileing

Avatar Image
edd2blue | 18:04 Sun 22nd Oct 2006 | DIY
3 Answers
what kind of ply should I use on top of very uneven toung& grove floor boards b4 i tile
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by edd2blue. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
If I understand your question, you intend to place ceramic tile over an uneven floor consisting of tongue and groove boards. This will require the addition of cement board such as this: http://www.hammerzone.com/archives/flooring/ti le/prep1/cement_backer.htm other wise the floor will be unstable and the tile or grouting will eventually crack. It's not difficult to install, especially the quarter inch thick one, but it does require special saw blades and drills for cutting holes and adjusting the length or width.
Additionally, it requires screwing to the subfloor every 8 inches with special screws as well as gluing it to the subfloor with the same mastic to be used for attaching the tiles... Not as daunting as it sounds but does take time. I just finished about 160 square feet...
-- answer removed --
I promise you that it'll crack before too long ... I'll bet �50 on it.

1 to 3 of 3rss feed

Do you know the answer?

floor tileing

Answer Question >>