Electrical Fault on Peugeot 306 Diesel 1998

esavin1 | 11:47 Mon 05th Sep 2005 | Motoring

0 Answers

The air blower, temp. control knob, air-con and re-circ. is control by 4 in 1 module I have taken it out and at the back of it there is a 26 pin connector link back to wiring loom with the ignition on and using a multimeter there is no voltage down to earth also the rear demister does not work the switch illuminates and with a multimeter down to earth there is voltage 12.5v using a current Haynes manual does not show the precise circuit diagram. I am almost sure its a bad earth fault because they both share the same earth mark E4 in the manual.PLEASE can anyone help or point in the right direction.

Thank You [email protected]

Ford Fiesta 1998 Oil Cap

coolant leak after top-up

Answers

Best Answer

Nobody has yet answered this question. Once some answers have been given, esavin1 will be able to select one answer as the best. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

There are no answers available for this question.

Do you know the answer?