top_driver
in what way would a bent fuel rail affect a cars running, some of the injectors were not sitting in correctly, and the rail to the injectors are at a slant, also what is the affect of worn or bad...
|
top_driver
hopefully this will be the last problem with car, for a while (previous posts) i said the car sounded rough thinking it was the engine, but now i know for sure it is coming from clutch or gearbox. and...
|
top_driver
i never really looked at the pictures on the side of the pack of spark plugs, but after looking and seeing the visual instructions, im very confused. first picture is turning with fingers, and the...
|
top_driver
i bought a new clutch that cost me nearly 600 excluding labour (i should have done myself) from the start it was sort of noisy i did the run in period, 500 miles. and more so not hard driving. but...
|
top_driver
is it possible to have too much residue from carb cleaner on an icv that might affect it in anyway
|
top_driver
Just out of curiosity and nothing more, what would happen (good or bad) if you sprayed carb cleaner into the cylinders from spark plug holes?
|
top_driver
Hi, I recently bought a gal fords fuel filter and the performance has gone right down, what are the chances of it being a dud, I don't think there is any leaks in any pipes but will check
|
top_driver
Question 2 can a clutch with no biting point be used in traffic
|
top_driver
Hi, can anyone give me any info on the panther stage 3 clutch
|
top_driver
i got the tube from carb cleaner inside the intake manifold near the disa valve, will this do harm or just burn away
|
top_driver
im not sure if it is a worry but when i shake my icv it rattles on inside, i just cleaned it out with carb cleaner, is this normal
|
top_driver
im after losing my valve, and i cant find as much as the electric cable it attaches to, where is there root of the cable, ha
|
top_driver
just wondering, can a faulty inlet cam sensor slip by a code reader
|
top_driver
i have no more problems with my car, now what am i going to do
i'll have to kick in one of the doors or something...
|
top_driver
hi, i had a video on my last post, of a rough sound, i put a pipe to hear where it was coming, from, it seems like it is coming from the intake manifold, what could that be, also the revs dip...
|
top_driver
does anyone know where i can find engine number on an e46 bmw
|
top_driver
instead of describing what it sounds like i have a video of it, to go along with what i can say with it acceleration response delayed and acceleration slower than it should be
|
top_driver
bmw e46 323i iv been trying to
figure out why it sounds so
rough and loud, its response and
acceleration not the best what
could it be...
|
top_driver
just to inform, i replaced coils and it running ok now, still doesnt have 100% power back and doesnt idle as smoothly as id like, i would like to find out what causing it but main problem is sorted
|
