Donate SIGN UP

no hot water!

Avatar Image
hobster1969 | 09:54 Wed 28th Jan 2009 | How it Works
6 Answers
ok, so the water heater is left permanently on (not on a timer) so we usually have hot water on tap!(lots of demand ie kids)! so if at night there is hot water.. the last few mornings its cold.?.. then after we have all (tried) to shower 1/2 later its hot again? weired.. any ideas?

Answers

1 to 6 of 6rss feed

Best Answer

No best answer has yet been selected by hobster1969. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
How is it heated?
Question Author
We live out in the sticks.. so the bolier is run by oil.. the central heating is all still working. is that what you mean?
Well that's blown my theory out of the water.

I was thinking you were on economy seven electricity, and the night time heating element had failed, so you only got the daytime top up immersion heater working.

However that might not be too far from the truth.

Have you got an electric immersion heater element turned on? Perhaps the oil boiler heat is not getting through, due to a stuck motorised valve, so you only get a small amount of hot water at the top of the tank.

After someone has used hot water listen to the hot tank. If the electric immersion heater is on you might hear the sound like a kettle in the early stages of heating water.
-- answer removed --
Could be the water in the pipes is cold, so it will take a while to run off until you get to the hot stuff.
-- answer removed --

1 to 6 of 6rss feed