Jobs

How it Works

petrol generator

hi there i was wondering if anybody can help me with my problem, i have a marksman lt 950 model petrol generator the engine starts first time but there no power in the output and also i tried to look for fuses but i can see any so someone please help me cheers

KILLERMCL Mon 01/09/08 19:14

<< Previous

Next >>

Subscribe to question

Post an Answer

beso
Tue 02/09/08
12:18

There are many different ways of designing an alternator so it is hard to know where to start.

It is possible that the excitation circuit is faulty. This can involve sliprings and carbon brushes. In this case check for corroded sliprings or worn out brushes. I have successfully refaced coroded sliprings in situ using a flat bladed screwdriver while the engine was running.

Some generators have an electronic automatic voltage regulator (AVR). This is usually a block of epoxy with wires coming out of it. Often connected to sliprings. They are not normally repairable.

Those without an AVR or sliprings usually have a large capacitor. This is generally a cylinder often white in colour with spade terminals. It will have a number followed by the letters "uF". If the capacitor is short circuited or low in value the generator may not excite. If it is faulty be sure to replace it with the exact value. More then a few percent out can result in excessive output voltage and damage any connected load.

It could also be a burned out winding.

ianmunt
Fri 05/09/08
17:24

or there could be an overload trip that needs resettimg.Is there any button somewhere you can press in to reset?

Post an Answer

Submit the above question and answers

add to del.icio.us	add to digg	add to furl
add to reddit	add to Technorati	add to Blinklist
add to StumbleUpon	add to squidoo	add to ma.gnolia
add to Cocomment	add to Netscape	add to Fark