Donate SIGN UP

Oil Heating

Avatar Image
Giggsie | 20:09 Tue 15th Oct 2013 | How it Works
10 Answers
My oil boiler is coming on but there is no water going to heat the radiators.
The pump is working anyone any idea before I call an engineer. Is there some sort of valve opens to release the water might it be stuck? We have also heating off a wood burner which is connected by a neutraliser to both systems which is still working fine.
Gravatar

Answers

1 to 10 of 10rss feed

Avatar Image
Most likely Naomi's motorised valve, Giggsie. ;o) It's a diverter valve (directs flow to either HW or CH depending on which one is selected. After a summer lay-off, they often stick. A tap with a hammer usually fixes it.......... if you can find the valve. Is there an airing cupboard with a copper cylinder?
09:19 Wed 16th Oct 2013
Is the boiler getting hot?
Had the same problem last year, it was a blockage in the pipe above the water pump
I had this between an aga and an immersion heater and drew bath loads of water off forcing the blockage, an air lock, to clear after about 3 baths equivalent........
I am alluding to the possibility that you have run out of oil.
We had a similar problem earlier in the year. A faulty motorised valve was responsible.
Most likely Naomi's motorised valve, Giggsie. ;o)


It's a diverter valve (directs flow to either HW or CH depending on which one is selected.

After a summer lay-off, they often stick. A tap with a hammer usually fixes it.......... if you can find the valve. Is there an airing cupboard with a copper cylinder?
Silence from Giggsie - perhaps I was right about the oil.
Question Author
thankyou all for answers slight tap with hammer has done the trick. Yes airing cupboard with tank hubby just tapped with hammer and radiators started to heat. Thanks probably saved us a fortune.
I apologise
Knowing nothing about the technicalities of central heating, I hesitated to post my idea, but I'm pleased it's sorted. :o)

1 to 10 of 10rss feed

Do you know the answer?

Oil Heating

Answer Question >>