Donate SIGN UP
Home > Motoring > Peugeot 206 brake lights stuck on

Peugeot 206 brake lights stuck on

Avatar Image
jmillo | 09:22 Sat 12th Mar 2005 | Motoring
3 Answers
I took my 206 for a MOT yesterday. All was well except that the brake lights had become stuck on, only going off when the ignition was turned off. The handbrake was off, the engineers couldn't find a microswitch. My father in law, a retired engineer is also stumped. Any ideas please?
prev fiat punto glow plug light
  
next peugeot 406 cutting out
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by jmillo. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image KebabMeister

Microswitch is normally behind the brake pedal.  If it's not there then it must either be built into the rod that goes into the master cylinder.  There has to be a physical switch somewhere!

Might be a case of pulling back the carpet and laying on your back and having a good look, torch in hand! 

11:12 Sat 12th Mar 2005
Avatar Image dougielogan
If it is not on the brake pedal lever it could be a pressure switch on one of the brake pipes in the engine compartment. 
14:23 Sat 12th Mar 2005
Avatar Image oracle123
on my 206 the micro switch is in the passengers footwell almost behind the glovebox.hope this helps.
19:46 Fri 30th Sep 2005

1 to 3 of 3rss feed

Do you know the answer?

Peugeot 206 brake lights stuck on

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.