Donate SIGN UP

screen washer not working

Avatar Image
ripley 1 | 20:18 Wed 27th Feb 2008 | Cars
5 Answers
my screen washer is not working on my 02 clio and i know its the pump my question is how do i remove the window wipers to get at the pump ive undone the nut but the wiper stays put . any help would be welcome
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by ripley 1. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
dont know about the clio but the pump on most cars is located in the washer bottle so there is no need to take off the wiper blades
easy one this one, they sort of sieze into place , just push/ pull/wiggle on the wiper towards the windscreen and it will loosen off , failing that if you are not confident go to a windscreen fitting centre and they will remove it for you for free I am sure .....
sometimes the little gauze on the rubber seal that the pump sits in clogs up with gunge and restricts the pump from working maybe worth a go trying this before you replace the pump itself.
Like matt1e says, the pump is usually located in or on the side of the washer bottle. If it's the pump, and not a blocked hose or nozzle. Either way, you don't need to mess with the blades.
Any noise from the pump when you activate it?

If not, check for a blown fuse. If so I suspect a blockage by the gunge that David mentions. It happens regularly on my Astra, and blowing out the filter is easy.

No idea about a Clio, but I very much doubt if you need to take wipers off. On the Astra you just grab the pump and lift it off the rubber flter.

1 to 5 of 5rss feed

Do you know the answer?

screen washer not working

Answer Question >>