Washing machine door seal

Hi just wondered if anyone knows if it's at all possible to remove the door seal on my Hotpoint washing machine so I can clean it? The seal is gunked up with a yukky smelling brown gunk. I've tried a hot wash, have tried washing soda & vinegar but the gunk is now transferring itself to my washing. I tried cleaning it in situ but it's very awkward :-/

Thanks!

Lise :-)
11:14 Wed 23rd May 2012
 
Best Answer


No best answer has yet been selected by lise08. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

Only 1 answer

Okay you need a toothbrush (old one lol) and some of that thick bleach you use in the loo. wear gloves and old clothes as the stuff will spatter. Pour some bleach into the seal and give it a good scrub round with the toothbrush. leave it a few minutes, wipe with kitchen paper and repeat. Put some more of the bleach into the detergent dispenser and run the machine on the longest hottest wash you can. When the wash has finished, check the seal which should now be clean, if it isn't repeat the process. Once the seal is clean,run a long cold cycle before you put anything in the machine then wash something that wont matter if it gets bleached.

Only 1 answer

Related Questions

Does anyone have problems using F***y liquitabs for washing? If so, do you have my problem - in that the liquitab finds its way to front of washing door and sits on top of the door seal thus doesn't...
Does anyone know how to clean black mould off the rubber seal round a washing machine door Without wrecking the seal ?
Casn anyone tell m e how to replace the door seal on my hotpoint aquarius wt540P? Thanks
hotpoint washing machine door seal replacement
The rubber seal on the door of my washing machine is black on the inside and pretty disgusting. Does anyone know how to get it clean? I have tried bleach and acid to no avail. I have also tried...

Latest posts