Quizzes & Puzzles0 min ago
Help!
15 Answers
I've managed to drop my work laptop and it landed on the side where the power supply goes in. I noticed it was bent so pulled it out and when I went to push it back, saw that the power jack is loose. Any ideas what I can do? Will it be broken or is it worth me opening it up and having a look. Are they expensive? I daren't tell work!!
Answers
1 to 15 of 15
Best Answer
No best answer has yet been selected by invisiblelady. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
"Why not take it to a local repair shop and let them look at it"
Doing that would get you in more trouble than simply reporting it to work at my place, it's not your decision to make about invalidating the warranty on a company laptop.
By all means offer to pay for the repair if they do get funny about it, but don't try and hide it.
Doing that would get you in more trouble than simply reporting it to work at my place, it's not your decision to make about invalidating the warranty on a company laptop.
By all means offer to pay for the repair if they do get funny about it, but don't try and hide it.
Thanks ChuckFickens. It's actually quite an old one and so there is no warranty left on it. I'm actually the IT support at work and so can more or less do what I want, but only sort out software problems. I'm pretty practical though and have done other things. I've ordered a new jack point off eBay. It is only £4.50 and looks pretty easy to fit. Have put out a call to our external IT support man who is always doing me favours lol. He knows what I am and am not capable of and will be honest. Suspect he will offer to nip round and fit it with a bit of luck! I was just worried that it was going to cost a bomb so a fiver isn't too bad. Wonder what the local rip off shop would have charged! Thanks for your input though. Much appreciated :-)
Actually the tricky bit it the desoldering :)
That and to get to it you have to strip every part of the laptop apart, which if you've never done one before isn't all that easy (and then putting them back together is a good test of memory and dexterity!).... I've done loads and it's not generally something I'd suggest somebody attempt unless they are very confident in what they are doing.
Have a look on youtube first for some videos about taking laptops apart to give you a heads up on how some of the connectors work as some of them are very easy to break, and most of all take your time and be gentle, if something doesn't want to come apart don't force it, find what's stopping it.
That and to get to it you have to strip every part of the laptop apart, which if you've never done one before isn't all that easy (and then putting them back together is a good test of memory and dexterity!).... I've done loads and it's not generally something I'd suggest somebody attempt unless they are very confident in what they are doing.
Have a look on youtube first for some videos about taking laptops apart to give you a heads up on how some of the connectors work as some of them are very easy to break, and most of all take your time and be gentle, if something doesn't want to come apart don't force it, find what's stopping it.
Hmmm.....that's the bit I'm worried about. I've found a 14 step video but I can see there is a lot of stripping down. I think I'll wait and see if friendly IT man offers! Lol. If it was my own I would give it a go, but I have to act responsibly when it's not. I think you're right. At least I know it's not going to cost me an arm and a leg. Although, it was the pot on my leg that knocked it off the bed in the first place :-(
Basically, the inside of an iPad is all battery!... the main board looks like this.
http://
http://
there should be service manual for your model available online
i replaced mine and it was a pain in the arse frankly - you do have to strip everything down step by step and be methodical... but myself and two others tried and just could not get the old solder out... so i had to replace the whole board... not just the socket... it was cheap enough and i was able to just slot it in.
be careful when reassembling that all the little plugs and tapes are properly put back together.
i replaced mine and it was a pain in the arse frankly - you do have to strip everything down step by step and be methodical... but myself and two others tried and just could not get the old solder out... so i had to replace the whole board... not just the socket... it was cheap enough and i was able to just slot it in.
be careful when reassembling that all the little plugs and tapes are properly put back together.
1 to 15 of 15
