Changing drive belt on QUADTRACK 30?

JohnWJ | 10:11 Mon 28th Jul 2008 | Home & Garden

6 Answers

What needs to be dismantled and how to change a damaged drive belt on the Quadtrack 30 lawnmower? The screws heads are clogged with dirt making virtually impossible to get a grip to turn them.

wheelbarrow

decorating bedroom

Answers

1 to 6 of 6

Best Answer

No best answer has yet been selected by JohnWJ. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

rugeleyboy

drill the screw heads off, once the side plate comes off you can get a pair of pliars or molegrips on the remaining screw to remove them.

changing the belt if very easy.

JohnWJ

Question Author

Many thanks rugeleyboy. I'm not that technically minded. If I drill out the screws, how do I fix the plate after refitting the drive belt?

markja

use an " impact driver " to loosen the screws.
if they are cross head and have 'rounded off' try sawing a slot in the head and use a flat 'driver. and WD40

JohnWJ

Question Author

Very many thanks you guys. My trouble is, I don't have very much patience, but persistance and a few swear words I do have, and I have managed to to insert the drive and get it working.

rugeleyboy

you would have to get 2 new screws, they will cost about 10p.

i dont think you can get into it with a hack saw can you? but an impact screwdiver is good if it works?

JohnWJ

Question Author

Thanks rugeleyboy! Everything is up and running. With a can of Plus Gas and a few swears words, it now works like a dream.

1 to 6 of 6

Do you know the answer?