Donate SIGN UP

Astra Car.

Avatar Image
Hughes 66 | 20:30 Fri 18th May 2007 | Motoring
2 Answers
I changed the altenator today on my friends car.All went ok.But ! he wanted to renew the drive belt a good Idea! i could not see any way of getting the belt out.The only way I could see was to take the engine mount off.this was too big a job to do in the limited time we had.Am I stupid or is their an easy way to change the belt.ASTRA 1.4 M reg power steering.I looked in Hanes manual didn't see any mention of taking engine mount off.
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by Hughes 66. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
If its the same as a Corsa you have to put a spline key into the tensioner pulley and turn it against its spring and then slip the belt off.
If i remeber correct there is a hole in the pulley where you can insert a bolt temporarily to hold the pulley slack while you change it
Yes you have to take off the engine mount .its only 2 bolts

1 to 2 of 2rss feed

Do you know the answer?

Astra Car.

Answer Question >>