Donate SIGN UP

Noisy Central Heating Pump

Avatar Image
GB123 | 20:08 Wed 27th Dec 2006 | DIY
1 Answers
Have a Myson Compavt CP63 Pump and the lasy couple of weeks this has started to get really noisy - sounds like a tractor whenever CH is on.
The only thing I can see to do with the pump is to potentially release some air - my own ideas as a long shot - I unscrew the central 'spindle' which comes out about 1 inch.. then a little dirty/hot water comes out... then I screw it back in again... but it's just as noisy.
Any ideas on what might be wrog with it/what to do to correct it gretaefully received. Do I just need to buy and install a new one? That an easy job? (Not done this before).
Gravatar

Answers

Only 1 answerrss feed

Best Answer

No best answer has yet been selected by GB123. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
It sounds Terminal to me and the bearings have worn i would replace ASAP before total failure.

Only 1 answerrss feed

Do you know the answer?

Noisy Central Heating Pump

Answer Question >>