ChatterBank0 min ago
wifi connection
3 Answers
Hi could someone please tell me how to get wifi from my netgear router.Any help would be gratefully received Thanks Grannie Annie
Answers
Best Answer
No best answer has yet been selected by boikers. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I'm working from a slightly different netgear router, so apologies if anything is not quite the same :
On a wired connection (from your PC or laptop) log in to your router :
http://192.168.0.1/start.htm
the username is admin
the password is password
{unless you have changed them}
Go to the wireless setting page from the menu (usually on the left of the first page)
Check that
Enable Wireless Access Point
Allow Broadcast of Name (SSID)
are both ticked
you should also see the SSID (network name) and password - if they are not already set then you need to fill the fields in with your chosen SSID and password - if you are given a choice of 'security options' then pick WPA2.
Once you have enabled wifi and know the SSID then you should be able to see your network from the iPad and connect using the Password.
On a wired connection (from your PC or laptop) log in to your router :
http://192.168.0.1/start.htm
the username is admin
the password is password
{unless you have changed them}
Go to the wireless setting page from the menu (usually on the left of the first page)
Check that
Enable Wireless Access Point
Allow Broadcast of Name (SSID)
are both ticked
you should also see the SSID (network name) and password - if they are not already set then you need to fill the fields in with your chosen SSID and password - if you are given a choice of 'security options' then pick WPA2.
Once you have enabled wifi and know the SSID then you should be able to see your network from the iPad and connect using the Password.