Peugeot 206 Brake front caliper removal

Impret-Sir | 15:29 Mon 16th Jun 2008 | Cars

9 Answers

Big long shot I kmow, but does anyone know the size of the torx bolts holding on the aboe to the hub? Trying to change the front discs on my wifes 206GTi and cant get the calipers off without the correct size bit, unfortunately its bigger than anything in my tool kit.

slight scratch on car windscreen

which 4x4 and where from

Answers

1 to 9 of 9

Best Answer

No best answer has yet been selected by Impret-Sir. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

chas2008

are you sure they are torx bolts??...

http://www.peugeot206cc.co.uk/repair-206/206/i nfo/gb/b3fg29k3.htm

Toureman

You need them for working on most cars, buy a cheap set from Halfords, the correct size will be there.

Impret-Sir

Question Author

Thanks for those speedy answers. Chas, yes, Im sure they are, or at least, they look likeTorx, they are not ordinary bolts. The heads are round, with an internal star shaped recess to accept a bit. And Tourman, thanks, I already have a set, its just that these are much bigger than any others on the car, or in my set. I was hoping to be able to purchase a single one, if I could find out what size it was.

Impret-Sir

Question Author

Chris, just had another look at your diagram. The bolts holding the caliper in picture two, when it rotates up out of the way to remove the pads, are normal bolts. In the picture you can see that this leaves another part secured to the hub, you dont need to move this to replace the pads, but it must come off to replace the disc.

chas2008

would of thought if you went to decent accessory shop they would know the exact one, to be honest ive changed pads on my 206 , but cant remember which tool !! must be my age, mine will be going on a ramp shortly (exhaust fell off !!) will try and find out for you..

Impret-Sir

Question Author

Thanks Chas, (and sorry for calling you 'Chris' earlier!), just to be clear, its not the pads im changing, removing them is a doddle, its the discs, this requires the removal of the whole caliper.

chas2008

did cross my mind, from what i remember it pivots on the pins (torx)
try this http://206gti.net/pvlbrakes/

chas2008

wahey....sussed it, T55 torx, just tried a bit on my car..

Impret-Sir

Question Author

Nice one Chas, thanks for taking the trouble!

1 to 9 of 9

Do you know the answer?