fan on 97mondeo not working

tadhgk | 14:56 Mon 28th Nov 2005 | Motoring

4 Answers

my fan is not coming on when it should and also it loses power at 2500-3000revs,maybe its all to do with same thing,any suggestions

Reverse off drive accident

austin 7

Answers

1 to 4 of 4

Best Answer

No best answer has yet been selected by tadhgk. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

dawg_kane

therm sensor on the radiator is possibly not working...this usual triggers the fan on most ford cars...

kat472

Agree with previous post, fan sensor usually on radioator that controls when fan comes on etc.. check wiring to that, short out wires, fan should come on, if only one wire, short it out to earth (chassis), fan should come on.

2.5 - 3.5k suggests a very specific power band maybe an exhaust leak or air filter problem?

worth a try!

tadhgk

Question Author

were bouts aare the sensors on a mondeo rad.the fan heater in the car is also only blowing cold air and not hot air.very cold without it in car

kat472

Should be on the front of the radiator.

Also if no heating inside car, sounds like maybe your thermostat is gummed up or knackered, follow large bore pipe from top of radiator to the engine block where it connects, this should be a removable (with bolts) cover, thermostat in there.

Careful with hot engines / boiling fluids etc.. and if you do dismantle make sure you fill up properly afterwards !!

1 to 4 of 4

Do you know the answer?